Using a Sierra Wireless RAVEN XE Modem with a HandPunch Clock

From time to time, you may wish to have a clock on its own network, or you may not have a network connection available at the site where the clock is to be installed.  In these instances, you purchase a Sierra Wireless Modem from HourDoc.com and configure it to work with your clock.

Here are the steps to connect the modem to the clock.

NOTE: to configure the modem, please click here for the article on how to a configure modem.

1. Power the modem by connecting the power cable to a power outlet.
2. Use the ethernet cord provided (you can use your own) and connect the modem to the ethernet jack at the back the clock.
3. Power the clock by connecting the power cable to a power outlet.
4. Configure the clock with the static IP of 192.168.13.100
5. Configure the clock with the subnet of 255.255.255.000